Two QR codes can hold the same link and still behave very differently. One is small and sparse, the other is dense and cramped. One was built with high error correction and survives a coffee stain, the other fails when a corner is folded. A comparison tool puts two codes side by side and shows what actually differs: how much data each holds, how dense the pattern is, what error correction level each uses, and how large each needs to be printed to scan reliably. It turns a guess into a measurement.
What to compare, and why
Start with the data. A short link makes a sparse code with big modules, which scans from further away. A long link makes a dense code with tiny modules, which needs to be printed larger. Then look at error correction, which comes in four levels: L at about 7 percent, M at about 15 percent, Q at about 25 percent, and H at about 30 percent. A higher level survives more damage but makes the code denser, so there is a trade-off.
A worked example, with numbers
A shop prints two versions of the code for its website. Version A holds a short link, 22 characters, at error correction M, and comes out as a 25 by 25 module code. Version B holds a long tracking link, 87 characters, at error correction H, and comes out as a 45 by 45 module code. Printed at 4 cm wide, version A has modules about 1.6 mm across, and scans from 40 cm away on a budget phone. Version B has modules about 0.9 mm across, and the same phone needs to be within 20 cm to read it. The shop keeps version A for the window and uses version B only on the receipt, where the phone is held close. The shop checks both with the QR code validator, tests the damage tolerance with the QR code error correction tester, and builds the short link version with the URL QR code generator.
When comparing saves a reprint
A window code and a receipt code are different jobs, so compare them before printing 500 copies, because a reprint costs more than the minute the comparison takes. If the comparison shows the dense code needs 5 cm but the window space only allows 4 cm, shorten the link first and compare again.
Compared on your device only
Both codes are analysed in your browser. Nothing is uploaded, nothing is stored, and no account is needed. Close the tab and the comparison is gone.
FAQs
What does this tool compare? Data length, module density, error correction level, and the print size each code needs to scan reliably.
Why do two codes for the same link look different? Because the error correction level, the size, and the way the link is encoded can all change the pattern, even when the destination is the same.
Which error correction level should I choose? M for a code kept indoors and handled gently, Q or H for a code outdoors, on packaging, or anywhere it might get dirty or damaged.
How large should a dense code be printed? Larger than a sparse one. A 45 by 45 module code needs at least 5 cm on paper, while a 25 by 25 code reads fine at 3 cm.
Does comparing codes cost anything? Nothing. Comparing is free, and you can check as many codes as you like.
Find a tool